Intodecor

Description

CHARACTERISTICS

INTODECOR is a innovative coating that associates the plastic coating workability with the transpiring of a traditional plaster like cement mortars . It is composed of selected marbles powders with various granulometries, hydraulic and air binders, specific admixtures and pigments with an excellent light stability.

APPLICATION FIELDS

Thanks to its mineral-based composition and its look, it is suitable for the finishing of ancient historic buildings as well as for new buildings coverings.

SUBSTRATE PREPARATION

INTODECOR must be applied on substrate based on cement mortars, premixed plasters, improvement plasters etc.; on those substrates that present saltpeter efflorescence, effectuate previously a renovation with the dehumidifying plaster IDROSTOP (see the technical sheet). In case of ancient buildings restoration, in order to guarantee a good transpiration, it is suggested to remove any plastic coatings before the application. Level eventual substrate irregularities.

PRODUCT PREPARATION

Mix one sack of INTODECOR with lt 6,0-6,5 of clean water with a mechanical mixer at low number of rotations until you obtain a thick lump free paste; let it stand for 10-15 minutes at least.

PRODUCT APPLICATION

It is suggested to apply the product in two coats; previously apply a coat of ALBUSIL FISSATIVO MINERALE (transpiring fixative to make uniform the absorption and consolidate the surface where the product will be employed). The first coat is applied by means of inox trowel to level the substrate; let dry for 10/12 hours at least. The second coat is applied by means of inox trowel and finished with plastic trowel treating the product in a circular way.